Hi there, Now available here 100% Tested Symphony Z40 Flash File (Stock Firmware ROM), You've comes the right place for direct download the smartphone Stock ROM. Here is a link to collect all the materials to install stock firmware. For example, all the info including Flash Tool, USB driver and Flashing guide are clearly mentioned. So that you can understand everything about it before downloading the Firmware Stock ROM. Follow below paragraphs for more details.
The Symphony Z40 Stock Firmware File will help you to fix all of the software problem on your Android device. The Symphony Z40 Official Flash Firmware File runs on based MediaTek chipset with interface Android 10 operating system. It is required Stock ROM when you want to perform one of the following software related tasks.
- Fix Starting Hang Logo of your Android device.
- Dead Mode Recovery on your Symphony Z40 smartphone
- Symphony Z40 Dead After Flash Solution.
- Bypass FRP/ Google Account from your Symphony Z40 Smartphone.
- Fix Black/White LCD in your Symphony Z40 mobile device.
- Upgrade the Stock ROM of your android device.
- Re-install the officially installed firmware.
- Troubleshoot software issues that cause your device.
- Fix unknown baseband error.
- Use firmware for Android development purposes.
- Remove malware, viruses and spyware from your Symphony Z40 smartphone device and much more.
To install this firmware on your Android device, we have created a comprehensive Symphony Z40 Android firmware flashing tutorial using SP Flash Tool. To successfully install the firmware on any Android device you need to read that whole post.
Overview: Symphony Z40 Stock Firmware (Flash File)
We are scanning it with a powerful antivirus to ensure security, after saving it by reading from a new mobile phone with the Chinese Miracle (CM2) update tool. In addition we have provided our website after testing by our skilled technicians. So you can download and use our flash file without any doubt. Hopefully the desired result awaits you.
Read by CM2MTK
PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM32)
MODE : PRELOADER PORT
PORT : 32
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN
BROM : BROM|BL : 0xFF|0x03
BROM : PRELOADER PORT
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info
SRAM: 0x0003A000 [ 232.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]
EMMC: CID : 70010054413238333220251BE519180B
EMMC: VEN : KINGSTON : OEM : 0 : ID : 544132383332 : PRV : 0x20
EMMC: VEN : KINGSTON : TA2832
EMMC: SNN : 622585113 ( 0x251BE519 ) , MF : 1/2021
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x74A000000 [ 29.16 GB ]
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000
RNID : 59148838E17BE3AB735E029177DCB496
DA : USB : HIGH-SPEED
Boot done!
Product Brand : Symphony
Product Device : Z40
Product Model : Z40
Product Name : Z40
Patch Level : QP1A.190711.020
Display ID : Z40_HW1_V7
Ver. CodeName : REL
Ver. Release : 10
Sec. Patch : 2021-06-05
Build Time : 06.07.2021
Product Manfct : Symphony
Product Info : Z40
Product Board : k65v1_64_bsp
Board Platform : mt6765
MT6765__Symphony__Z40__10__Z40_HW1_V7__QP1A.190711.020__Z40
Read : preloader.bin
Read : recovery.img
Read : vbmeta_system.img
Read : vbmeta_vendor.img
Read : persist.img
ExtSparse : Compression ratio : 80%
Read : proinfo.img
Read : md1rom.img
Read : spmfw.img
Read : tinysys-scp.bin
Read : sspm.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : dtbo.img
Read : tz.img
Read : super.img
ExtSparse : Compression ratio : 23%
Read : vbmeta.img
Read : cache.img
Read : userdata.img
FW Size : 3.28 GB
Android Info saved : _Android_info.txt
Scatter : MT6765_Android_scatter.txt
Saved to : E:\MT6765__Symphony__Z40__10__Z40_HW1_V7__QP1A.190711.020__Z40\
Done!
Elapsed: 00:05:06 alert-success
Check out: Download Samsung FRP Unlock Tool alert-success
Symphony Z40 Flash File Without Password 100% Tested
Here is a direct link to download Symphony Z40 Stock Firmware read all the information section of stock rom carefully.
- Device Name: Symphony
- Model: Z40
- Type: Official
- Gapps File: Included
- OSVersion: Android 10
- Processor: MediaTek
- Chipset: MT6765
- Tool Supported: SP Flash Tool
- Firmware Type: Scatter
- Zip File Size: 480M
- File Password: bdflashmaster
- Version: MT6765__Symphony__Z40__10__Z40_HW1_V7__QP1A.190711.020__Z40
Before downloading, please match the firmware version and mobile picture at your own risk. The authorities will not be held responsible for your mistakes. alert-warning
How to install Stock Firmware
Before we list the installation steps, there are some prerequisites that you must be complete. Make sure your device is capability of meeting all of these requirements. Therefore, users may have difficulty flashing files and performing other related tasks. The SP Flash tool, you can easily install stock firmware rom on Symphony Z40 device, upgrade or downgrade software version, and make many other changes. In this guide, we will look at the functionality of this tool and the steps to flash firmware and ROM on supported devices. Follow along for detailed instructions.
Pre-requisite
- We are always recommended to take complete backup the device initially for your personal data security. Follow Full Backup Tutorial
Next, we recommend that you download and install MediaTek Vcom USB driver on your PC. - Download the latest version of the SP Flash Tool: Smartphone Flash Tool.
- It is advisable to keep your device adequately charged; At least 50% is recommended.
- If you use this tool to flash stock ROM, download Scatter (MT6765_Android_scatter.txt) stock firmware for your device.
That's it; These were all requirements. You can now proceed to the installing steps.
Steps to Flash with SP Flash Tool
- Navigate to the folder where you extracted the SP Flash tool and double click on the flash_tool.exe file to launch it.
- Then click on the Choose button next to the Scatter Loading File section.
- Browse to the downloaded stock ROM, select the Scatter file and click Open.
- The tool will now start loading all the stock firmware files. Once this is done, it is recommended to uncheck the preloader option. This is because flashing the preloader.bin file may cause some problems.
- Once this is done, click on the download button of the SP Flash tool. The whole interface should now be grayed out, as shown in the picture.
- Turn off your device now. Press and hold the volume up and down buttons together and connect to the PC via USB cable.
- As soon as you connect the device to the PC, the tool will recognize your device and start flashing automatically.
- You can keep track of the same using the progress bar below.
- When the process is complete, you will receive a Download OK message, indicating that the process has been completed successfully.
- You can now turn off the tool and unplug the device from the PC.
- Finally, reboot your device using the power key and it should boot into the OS.
So, It was from this guideline on how to download and install the SP Flash Tool. We've also listed its detailed features and steps for flashing Scatter firmware on your Symphony Z40 Android devices. If you have any questions, let us know in the comments section below.
Search terms: Symphony Z40 flash file dead solution, Symphony Z40 flash file 2gb ram, Symphony Z40 flash file without password, Symphony Z40 firmware, Symphony Z40 flash file needrom, Symphony Z40 dead after flash, Symphony Z40 frp unlock file, Symphony Z40 bypass google account
Post a Comment