On this page, we will provide for you GEO Phone T15 and T19 MediaTek MT67xx VCom drivers on your windows PC. With this USB drivers, you can operate Geo Phone T15 and T19 KaiOS feature phone to engage in installing stock firmware, flash files and custom recovery, bypassing unlock, resetting screen lock, pin code lock on your devices.
Well done, in this post you will find the supported MediaTek chipset preloaded drivers for GEO Phone and many more. To use this drivers, first make sure you are running the MediaTek processor on your phone. If yes, then you can install and run this MediaTek VCOM driver on your windows PC without any issues once you follow the installing guide. After installing this drivers, you can use the SP Flash tool to install the stock firmware on any Geo phone. To transfer any files to your phones.
Download GEO Phone USB Drivers for Windows
The Geo phone USB Drivers allows to download and then install the drivers. You must have a PC/Laptop running Windows 7,8, or 10.
Direct Installation
| File Name: | MediaTek_Preloader_USB_VCOM_Drivers_Setup_Signed.zip |
| File Size: | 8.85 MB |
| Uploaded: | September 25, 2020 |
| Download link: | Click here to download |
Manual Installation
| File Name: | MediaTek_Preloader_USB_VCOM_Drivers.zip |
| File Size: | 8.39 MB |
| Uploaded: | September 25, 2020 |
| Download link: | Click here to download |
Download Geo Phone Flash Tool alert-info
How Install GEO Phone USB Drivers
As we said, this driver will run on Windows XP and above. However, for Windows 8 and newer, you have to disable Driver Signature Verification. You can google up and find how to disable driver signature verification for PC running Windows 8 and above.
- Download the GEO Phone USB Drivers from the above Download Link
- Now Extract the Downloaded GEO Phone USB Drivers on your PC.
- On your Computer, Go to Device Manager. To do that, open Control Panel by clicking the control panel on your desktop
- If you cannot find it, then right-click on My Computer and click on “Manage,” and next will open a pop-up screen and select device manager.
- Once you click on the Device Manager menu, you will see your Computer name on the top of your Device Manager Settings.
- Now tap on Action → Select Add Legacy Hardware.
- You will be welcomed with add a legacy screen in your new pop screen; there, you can hit the next button.
- From the next screen, you have to check the “Install the Hardware that I manually Select from a list” option and hit the next button
- Select Show All Device and Hit Next Button
- Now Select the Have Disk on the following screen and select any .inf file you extracted in Step 1.
- Now Click the browse option and browse for the Extracted Folder of Drivers on your PC.
- Once you select the .inf files and click Open, When you see a security warning on which you can select Install Anyway.
- After installing all .inf files, you can Restart your PC.
- That’s it! You have successfully installed the GEO Phone USB Drivers on your computer.
I hope this guide helped in installing the USB VCOM Drivers. If you have any queries, please leave a comment down below.
Post a Comment