You are searching Winstar W28 Flash File? You come in the right place. Using this firmware, you can flash the firmware file to troubleshoot any issues or problems on your device. Yes! With this guide, you can resolve problems such as Pin remove/unlock, Full flash, Dead recovery, As can be seen Automatically restart phone and more also fix any software related problem.
To flash the firmware file on your Winstar W28, we are using the Miracle Thunder as this device is powered by SCR. We have shared all the requirement files to download and install the firmware on your device.
Download Winstar W28 Flash File Firmware
File Name: Winstar W28
Processor: SC6531E
File Type: Bin
File Size: 4MB
Download Winstar W28 SC6531E Flash File
Need also: Winstar W30 Flash File SC6531E
How to Flash
Before installing the Firmware on your Winstar W28, you should download the firmware flash file. Then download and install the USB Drivers and flash tool on the PC as well. Once you’re done with these, you can proceed to the steps below. But let’s take a quick look at the Firmware importance and firmware details above.
Step to Flash Winstar W28
Following below steps to flash your Winstar W28 mobile phone using CM2/Miracle or other’s flash tools. Also We have shared a short tutorial of Miracle Thunder Tool.
- Download and extract the flash file on your computer.
- Install the USB Driver on your computer.
- Lunch tool on your PC screen
- Select SPD
- Choose 6631E SP
- Add file on the tool
- Click the Start button.
- Connect your device to computer via USB cable
- Insert battery in mobile.
That’s it, guys. We hope that you’ve installed the Stock Firmware on your Firmware device successfully. And, if we don’t work with this guide. Then do it in the comments section below
Post a Comment