Hellozen Mate 20 X Flash File MT6580 (Firmware)

Download Hellozen Mate 20 X Stock Firmware File (Flash File)

Are you thinking of flashing your Hellozen Mate 20 X smartphone and looking for the desired flash file? Then this post may be helpful for you. So read the whole post carefully, because I have shared the download link of all the equipment including flash file, USB driver, flash tool to flash the Hellozen Mate 20 X smartphone. Also discussed the flushing procedure step by step.

The Hellozen Mate 20 X Flash File is using to solve Dead Repair, Hang Logo, LCD Fix, FRP Remove, Downgrade, Upgrade Firmware, Re-install of your Hellozen Mate 20 X device. The flash file currently comes in a zip package and we are publishing below this firmware all details. you first check the details before download the firmware. Because you will facing any problems for which we will not be responsible in any way.

 

 

 

Download Hellozen Mate 20 X Flash File Firmware

 

File Name: Hellozen Mate 20 X
Processor: MT6580
File Type: Scetter
OS Version: Android 7.0

 

 

 

Download XH_Q21_X20_Mate_20_X_V1.0.2ZX_20190112

Flash Tool: Download Latest SP Flash Tool

USB Driver: Download MediaTek VCOM USB Drivers

 

How to Flash

 

Before flashing the flash file on your Hellozen Mate 20 X, you should download the firmware flash file. Then download and install the USB Drivers and flash tool on the PC as well. Once you’re done with these, you can proceed to the steps below. Take a complete backup of your device after start flashing process.

 

 

Step to Flash Hellozen Mate 20 X

 

Following below steps to flash your Hellozen Mate 20 X Smartphone using CM2/Miracle or other's flash tools. Also We have shared a short tutorial of  SP Flash Tool

1. Download and extract the Hellozen Mate 20 X firmware package on your computer.
2. After extracting the package, you will find USB Drivers, flashing tool, and firmware files.
3. Install the provided drivers on your computer. Skip this step if you already have the drivers installed on your PC.
4. Launch the firmware flashing tool and load the Hellozen Mate 20 X firmware files inside the flash tool.
5. Connect your device to the computer using USB cable and begin the firmware flashing process.
6. Once the flashing is completed, you will see a success message.
7. Disconnect your Hellozen Mate 20 X device from the computer and restart the device.

 

That’s it, guys. We hope that you’ve installed the flash file on your device successfully.