Gionee Q80 Flash File SC6531E (Firmware)

 Download Gionee Q80 Stock Firmware ROM

Are you thinking of flashing your Gionee Q80 phone and looking for the desired flash file? Then this post may be helpful for you. So read the whole post carefully, because I have shared the download link of all the equipment including flash file, USB driver, flash tool to flash the Gionee Q80 mobile phone. Also discussed the flushing procedure step by step.

 

 

The Gionee Q80 Flash File is using to solve Downgrade, Upgrade Firmware, Re-install of your Samsung device. The flash file currently comes in a zip package and we are publishing below this firmware all details. you first check the details before download the firmware. Because you will facing any problems for which we will not be responsible in any way.

 

 

 

Download Gionee Q80 Firmware Flash File

File Name: Gionee Q80
Processor: SC6531E
File Type: Bin
File Size: 4MB

 

 

Firmware Link:  Download Gionee Q80 SC6531E Flash File

 

 

 

How to Flash

 

Before flashing the flash file on your Gionee Q80, you should download the firmware flash file. Then download and install the USB Drivers and flash tool on the PC as well. Once you’re done with these, you can proceed to the steps below. Take a complete backup of your device after start flashing process.

 

 

Step to Flash Gionee Q80

 

Following below steps to flash your Gionee Q80 mobile phone using CM2/Miracle or other's flash tools. Also We have shared a short tutorial of Miracle Thunder Tool.

1. Download and extract the flash file package on your computer.
2. After extracting the package, you will find USB Drivers, flashing tool, and flash files.
3. Install the provided drivers on your PC (Skip this step if you already have the drivers installed on your PC).
4. Launch the flashing tool and load the firmware files inside the flash tool.
5. Choose SPD & Select SP 6631E
6. Click Star Button
   
7. Connect your device to the computer using USB cable and begin the firmware flashing process.
8. Once the flashing is completed, you will see a success message.
9. Disconnect your device from the PC and restart the device.

 

That’s it, guys. We hope that you’ve installed the flash file on your device successfully.