How to Flash Symphony D40i Firmware File [Stock ROM]

Guide to Flash Symphony D40i Flash File

Welcome!! You want to install flash file on your Symphony D40i bar mobile phone. We are publishing this page accurate and tested flash file for Symphony D40i mobile device. The flash file firmware comes in a zip package. Also, we are attach below all details of this flash file and installation. So, you can use the flash file without any manufacturing issue.

Talking about Specification: The Symphony D40i is comes with 2.4 inches display with resolution of 240 x 320 pixels. Symphony D40i is powered by Feature phone and comes with 32 MB RAM. As far as the cameras are concerned, the Symphony D40i has 0.3 MP primary camera on the rear. Based on display size, processor and other hardware Symphony D40i comes with Removable Li-Ion 1200 mAh battery for better performance.

Flash Details:

• Supported Device: Symphony D40i
  
• Flash Version: D0i_S00.SW_HW1_V2
• File Type: Bin
• File Size: 4 MB
• Support device: MT62xx chipest 

How to Flash on Your Symphony D40i

To make this guide easier for new users, we are going to divide this into multiple parts. First, we will help you to setup device drivers and Flash software. Then we will begin with the actual process followed by the downloading flash file. So are you ready?

Now, before we get straight to the steps to install Flash File on Symphony D40i, let us take a look at some of the prerequisites.

 

Prerequisites

• This guide will only work for Symphony D40i
• You should have a working Windows PC/Laptop
• Charge the device battery up to 50%
• Take a backup of your Device.
• Download Flashtool and install on your PC.
• Download and install Miracle USB driver on your PC.
• Download Symphony D40i Flash File
  

Once you have the above prerequisites, you can proceed to Instructions to Flash File on Symphony D40i.

Do you Flash?

• Writing
• Dead recovry
• Hang starting logo
• Remove screenlock
• Remove privacy lock
• Remove password
• Other's
  

Steps to Flash Your Symphony D40i

1. Download and extract the Mycell Mi9 flash file on your computer.
2. Install the MTK USB Driver on your computer.
3. Lunch tool on your computer
4. Select MTK
5. Open Crack/Cm2MTK or another tool
6. Choose MT62xx
7. Add file on the tool
8. Click the Start button.
9. Connected your phone USB cable to computer.
10. Insert battery in mobile.
    

That's ok! Now started your flash the installation process.


Follow Another Way to Flash This Phone:





If you are not complete to flash your phone the above guideline, So you can follow the below guideline...

We are not responsible for your technical problem.