You will find out in this page Symphony V99 SC7731E tested Flash File Firmware without any issue. It's comes in a zip package. Also, Here you will find out the flash file firmware using all requirement, guideline and device details. So, Now follow and reading below in this page.
Talking about: The Symphony V99 comes with 5.0 inches, 68.9 cm2 FWVG Capacitive touch screen 16 million colors and resolution 480 x 854 pixels. Symphony V99 has Single 5 MP primary camera on the rear and 2 MP front shooter for selfies. Symphony V99 performing Quad-core 1.3GHz processor and GPU is Mali-T820. It has 1 GB of RAM and 8 GB internal storage, which can be expanded up to 32 GB external storage. It was powered by a standard Removable Li-Po 2000 mAh battery.
- Cheek out : Symphony Others Stock Firmware File
Firmware Details
- Device: Symphony V99
- RAM: 1GB
- ROM: 8GB
- Processor: SC7731E
- OS: Android 8.0 Oreo
- Firmware Size: 782MB (Zip)
- USB Driver | Download
- SPD Flashtool | Download
- Firmware Link | Download_Symphony_V99_HW1_V9_08082019_SPD7731E
How To install Firmware on Symphony V99
If you are going to install the above Firmware on your Symphony V99 device, then take a complete backup of Massage, Contact, Photos and others as because your personal data will be deleted after flashing the Flash Firmware.
Steps to install Flash Firmware On Symphony V99
- Download extract the Symphony v99 Firmware zip to your PC.
- Download SPD Flash Tool to your PC
- Look for flash tool and launch it.
- Minimize Sp Flash Tool window tab.
- Locate the downloaded Symphony v99 extracted folder.
- Extract the file from zip format.
- Open SPD Flash Tool.
- Click on add file loading.
- Locate the pac file on the extracted firmware folder.
- Select the pac file in the directory.
- Wait few sec.. for it to load the files.
- Power off your smartphone.
- Click on Start.
- Connect your smartphone to computer with USB cable.
Post a Comment