HiSense Infinity H11 Lite guide to Unlock Bootloader

The HiSense Infinity H11 Lite features a 5.99-inch IPS LCD display with a screen resolution of 1440 x 720 Pixels. It is powered by MediaTek MT6737T 64-bit Processor coupled with 2GB of RAM. The phone packs 16GB internal memory with expandable storage support of 128GB via microSD card. The camera on the HiSense Infinity H11 Lite comes with 13MP rear camera with dual-LED dual-tone flash and 8MP front camera for selfies.

If you want to root your phone, then you may have to unlock the bootloader on your device. HiSense Infinity H11 Lite device comes with bootloader locked. To unlock the bootloader, you can follow our this guideline.

The Bootloader is a code which runs when we turn on our device. This code initializes some hardware and then loads the kernel and ramdisk, and gets the boot process going. So this process is known as Bootloader. The same concept applies to all the technical stuff such as Laptop, PC, Smartphones and any such device. Every Android OEM manufacturers lock the bootloader even though it is an Open Source. So if you want to try any CUSTOM ROM, it is impossible to load the CUSTOM ROM without the Unlock Bootloader.

Enable developer options and USB debugging

USB debugging must be enabled to connect your HiSense Infinity H11 Lite to a PC. In modern-day Android device USB debugging option is seen hidden inside the developer options. Developer options and are not enabled by default. So to enable USB debugging you will first have to manually enable developer options on your HiSense Infinity H11 Lite. The steps to enable developer options on HiSense Infinity H11 Lite are:

[*] Enable developer options

1. Open settings
2. Swipe down and tap on About Phone
3. Keep tapping on the build number for 5 times
4. You will get a message saying developer option is enabled
   

[*] Enable USB debugging are:

1. Open settings
2. Tap on developer option
3. Toggle on USB debugging by tapping on the toggle button

 Steps to Unlock Bootloader on HiSense Infinity H11 Lite

1. First of all, Enable Developer Mode on the HiSense Infinity H11 Lite
2. Launch the Settings application
3. Scroll down and tap on the Developer Options option
4. Toggle the OEM Unlock option on
5. Confirm by tapping the enable option.
6. That’s it! You have unlocked the bootloader on your HiSense Infinity H11 Lite.
   

Most Mediatek device comes out of the box with the bootloader unlock, read more to know about How to Unlock Bootloader on Any Mediatek Device.

Note:

Unlocking Bootloader of your Android device may void your device’s warranty. we will not be responsible for any internal/external damages to the device that may happen while/after following this guide. Please proceed if you know what you’re doing!

We hope this guide was easy to enable the OEM unlock to unlock bootloader on HiSense Infinity H11 Lite.