Download February 2019 Security Patches for Meizu M6 Note [Firmware File]

Meizu is a Chinese consumer electronics company headquartered in Zhuhai, Guangdong province, China. One of the top ten smartphone manufacturers in China, the company entered India with the launch of its M1 Note budget phablet. Initially, the company started making MP3 players and feature phones. It diversified into smartphones. The company sells its devices in markets such as Hong Kong, Israel, Russia, Ukraine, France and Italy.

The Meizu M6 Note smartphone features a 5.5" (13.97 cm) display with a screen resolution of Full HD (1080 x 1920 pixels) and runs on Android v7.1.2 (Nougat) operating system. The device is powered by Octa core, 2 GHz, Cortex A53 processor paired with 4 GB of RAM. As far as the battery is concerned it has 4000 mAh. It's is powered by a Exmor-RS CMOS Sensor. Other sensors include Light sensor, Proximity sensor, Accelerometer, Compass, Gyroscope. So, does it have a fingerprint sensor? Yes, it does. For graphical performance that can make games run smoothly, this phone has got a Adreno 506 GPU. On board storage is at 64 GB with the option to expand the memory by Yes Up to 256 GB.

In this post, You will find out the Meizu M6 Note Stock Flash Firmware File download link and install guideline. Also in addition page from this, all the information related to this flash firmware file is described here. We've provide the Snapdragon USB driver and flash tool to flash this device in flash firmware file.

Download February 2019 Security Patches for Meizu M6 Note

2019-02-21	Flyme 7.1.1.0G	Download Here
2018-11-29	Flyme 7.1.0.0G	Download Here
2018-08-10	Flyme 7.0.1.0G	Download Here
2018-07-05	Flyme 6.1.4.3G	Download Here
2018-01-05	Flyme 6.1.4.1G	Download Here

 
Upgrade Guide

1. Copy firmware "update.zip" onto the phone, open the "Documents" and click the firmware "update.zip" to upgrade firmware
2. System upgrading, please do not shut down the phone
3. The system will automatically reboot after upgraded
4. After boot up, please check “Settings->About” to verify the correct firmware version is installed

Install Guide of Meizu M6 Note Stock Firmware

1. Now in the QFIL Folder, Click the QFIL application file and Open it.
2. Once you open it, you will see the following screen on your computer
3. Turn your Phone off using the power button
4. Once your Phone is switched off, Now Hold the Volume UP button and try to connect your phone to PC/Laptop using USB Cable
5. Your Phone model will be displayed on your PC
6. Now Click the Browse option to select the downloaded Stock ROM on QFIL application
7. Now browse and Select the right firmware you downloaded from the folder
8. Now Click The Download button to start the Installation process.
9. Installation Process will take almost 10-15 minutes to complete. Be Patient! Don't disconnect your phone from computer.
10. Once it is done, your device will reboot automatically.

That's it ! You have completed the installation process.!


Important Note 

1) Please do not upgrade the phone with non-official firmware
2) Upgrading international version phone with the mainland China Simple Chinese version firmware may lead to compatibility issues
3) Before upgrading, check that the battery has at least 20% capacity
4) Selecting "Clear data" will delete all personal data ( such as Notes, Email, and Contacts); whereas the internal storage for Music and Camera photos ...etc. will remain intact.
5) Already opened system permission (ROOT), the user must select "Clear Data" to clear phone data for firmware upgrade, Otherwise, it may cause abnormal system or application error ;
6) After upgrading the firmware, if system reboot or application force close, please try to reset your phone or re-upgrading (Settings-> phone->Storage->Factory reset to reset the phone)